Not for
Reproduction
48
To Reduce the Speed of the Faster Wheel
1.
Loosen the securing nut (B).
2.
Turn the top speed adjustment bolt counter-clockwise to
reduce the speed.
3.
Retighten the securing nut when adjustment is complete.
WARNING
DO NOT adjust the tractor for a faster overall speed
forward or reverse than it was designed for.
Cutting Height Adjustment
The cutting height adjustment pin (A, Figure 49) controls the
mower's cutting height. The cutting height is adjustable between
1-1/2" (3,8 cm) and 5” (12,7 cm) in 1/4” (0,64 cm) increments.
Note: Make sure that the pin is inserted into the holes in both
upper and lower plates of the pin box (B).
49
To set the cutting height at 1-1/2” (3,37 cm):
1.
While sitting in the operator’s seat, press the deck lift foot
pedal (C) forward until it locks into the 5" (12,7 cm) position.
2.
Remove the cutting height adjustment pin from the hole that
it is installed in.
3.
Press the deck lift foot pedal forward and then push the lock
lever (D) towards the right to release the lock.
4.
Slowly release the deck lift foot pedal until it comes to rest
against the stationary pin (E) in the 1-1/2” (3,37 cm) cutting
height hole.
5.
Place the cutting height adjustment pin in the storage hole
(F).
To set the cutting height in the range of 1-3/4” (4,40 cm)
and 4-3/4” (12,06 cm):
1.
While sitting in the operator’s seat, press the deck lift foot
pedal forward until it locks into the 5" (12,7 cm) position.
2.
Place the cutting height adjustment pin in the desired cutting
height.
3.
Press the deck lift pedal forward and then push the lock
lever towards the right to release the lock.
4.
Slowly release the deck lift foot pedal until it comes to rest
against the cutting height adjustment pin.
To set the cutting height at 5" (12,7 cm):
1.
While sitting in the operator’s seat, press the deck lift foot
pedal forward until it locks into the 5" (12,7 cm) position.
2.
Place the cutting height adjustment pin in any open cutting
height hole. The lift lock lever holds the mower deck at 5"
(12,7 cm) while cutting.
Foot Pedal Adjustment
The deck lift foot pedal can be adjusted to accommodate the
operator’s height for optimal comfort.
To adjust pedal position:
1.
Remove the foot pedal (A, Figure 50) from the pedal mount
tab (B).
50
35
