Not for
Reproduction
Seat Adjustment Lever: The seat can be adjusted forward and
back. Move the lever towards the left, position the seat as
desired, and release the lever to lock the seat in position.
Removable Floor Plate: The floor plate can be removed for
easy access to the mower deck. To remove the plate, remove
the retainer hardware and tilt the floor pan up and then remove
from the machine. Reverse the process for re-installation.
Retractable Seat Belt: The seat belt is used to secure the
operator to the seat.
The seat belt should always be worn when the Roll Bar is in
the raised position. The seat belt should never be worn when
the Roll Bar is in the down position.
Transmission Oil Fill: Transmission oil is added through the
hydraulic oil tanks. It also serves as extra holding capacity for
oil as the transmissions heat up and the hydraulic oil expands.
See
Check / Fill Transmission Oil for oil level check and fill
procedures.
Hydraulic Actuators:
Control Name
Icon
Hydraulic Actuators
Each transmission on this unit is equipped with a hydraulic
actuator. The hydraulic actuators deactivate the transmission
so that the unit can by pushed by hand. Both hydraulic actuators
must be in the same position whether you are driving the unit
or pushing it by hand. See
Pushing the Unit by Hand for
operational information and control location.
Suspension Seat (Select Models):
Select models of this series of mower are equipped with a
suspension seat.
8
Control Name
Callout
Seat Adjustment Lever (Forwards / Backwards)
A
Seat Adjustment Knob (Suspension)
B
Seat Adjustment Knob (Recline)
C
Seat Adjustment Lever (Forwards / Backwards): The seat
can be adjusted forward and back. Move the forwards /
backwards seat adjustment lever, position the seat as desired,
and release the lever to lock the seat in position.
Seat Adjustment Knob (Suspension): The suspension
adjustment knob adjusts the suspension of the seat (ride
comfort). Turn the adjustment knob until the display scale has
a reading that matches the weight of the operator.
Seat Adjustment Knob (Recline): The recline adjustment knob
adjusts the amount of the angle of recline for the seat back to
a maximum of 14 degrees. Turn the recline adjustment knob
until the desired amount of recline is achieved.
Instrument Control Panel
Models with Carbureted Engines:
9
15
