Snapmaker TH-L-P100-W450, Quick Start Manual

Page: 39 / 43

35 Quick Start Guide
If one of the following conditions happens, thickness measurement may fail:
If the laser inside the 10W Laser Module is overheated to more than 55 ℃ ,
the machine will launch overheat protection and pause the ongoing job. Wait
until the temperature drops back to normal. Then, click
Resume to continue
laser engraving and cutting.
If the thickness measurement fails, you can unselect Auto Mode on the
Start Job window so that you can enter the Manual Mode. Manually input
material thickness, and click
Start to start laser engraving and cutting.
The material thickness is over 50 mm.
The material texture is transparent, or the material surface is glossy or
specular.
The material color is red or black.