Snapmaker TH-L-P100-W450, Quick Start Manual

Page: 36 / 43

32
On the top-left corner of Snapmaker Luban, click Back to go back to the Home page.
Select Laser > 3-axis to enter the Laser G-code Generator . After finishing Job Setup ,
select Camera Capture > Add Background , and click Start . The machine will take a photo of
the work area and use it as the background for the engraving and cutting object. After the
photo is captured, click
Confirm .
3
Zoom into the image and move the lines until they perfectly match the square,
and then click
Confirm > Apply to see the finished image. If the object in the
photo remains twisted, click Calibrate and repeat this step.
a
If the captured image is twisted out of shape, click Calibrate to manually calibrate
the camera.