Snapmaker TH-L-P100-W450, Quick Start Manual

Page: 31 / 43

27 Quick Start Guide
The 10W Laser Module contains a thickness measurement system that uses the
triangulation technique to measure material thickness. Firstly, the red laser emitter
projects a red dot on the material surface. Then, the camera captures an image of
the red dot. Finally, the thickness measurement system analyzes the image data to
calculate the material thickness. Before you use the thickness measurement system
for the first time, you need to calibrate its initial parameters.
Place the provided calibration target on the center of the laser engraving and cutting
platform, and tap
Start .
1
The red laser emitter is a Class 2 laser product. Do not look directly into its
aperture when laser beam is emitted.
How It Works: Measure Material Thickness
Start Thickness Measurement Calibration
3.3 Calibrate the Thickness Measurement System