Snapmaker TH-L-P100-W450, Quick Start Manual

Page: 17 / 43

13 Quick Start Guide
Get the screwdriver ready. The screwdriver head H2.5 is used for assembling the
machine. The other heads are used for maintenance. Before use, ensure that the screw
bit holder is put back into the handle.
This Quick Start Guide takes Snapmaker 2.0 A350T as a demonstration. All steps
and illustrations apply to the assembly and use of the 10W Laser Module on other
compatible machine models. The 10W Laser Module can be used together with the
Rotary Module for 4-axis laser engraving and cutting. For more information about how
to use the 10W Laser Module together with the Rotary Module, refer to the User Manual
of the 10W Laser Module on
https://support.snapmaker.com .
The Quick Start Guide is intended to guide you through the first operation of the 10W
Laser Module. Here is the workflow: calibrate the machine > fasten the material > use
Camera Capture to determine the laser engraving and cutting position > start laser
engraving and cutting in Snapmaker Luban. For other workflows, including the Work
Origin method, refer to the User Manual of the 10W Laser Module on
https://support.
snapmaker.com .
1.8 About this Quick Start Guide