background image

!

WARNING

This car seat can only be installed 

using a 3-point seat belt.

Vehicle seat belt – shoulder belt

Vehicle seat belt – lap belt

This car seat is suitable for all vehicles equipped with a 3-point seat 

belt, approved to ECE R16 regulation.

This car seat only can be installed on a forward facing  passenger 

seat. Do not install the child car seat at the lateral and rear facing 

passenger seat.  

Suitable to install car seat at 

this position

Do not install car seat at 

this position

Do not install the car 

seat at the front 

passenger seat with 

an active airbag

The car seat can be 

used if this passenger 

seat has a 3-point seat 

belt

1

2

Note: Above illustration is based on a left hand drive car

        

1. Application of Car Seat

For your child’s safety, please follow below instructions:

Contents

1. Application of Car Seat

2. Understanding Your Vehicle

3. Safety information

4. Car seat parts

5. How to ensure the shoulder belts are at the correct height

6. How to adjust the shoulder belts

7. How to fasten the harness buckle

8. How to adjust and secure the harness

9. How to adjust the reclining position of the car seat 

10. How to use the red lock-off

11. How to install car seat rear-facing for Group 0+ (0-13kg)

12. How to install car seat forward facing for Group I (9-18kg)

13. How to remove the car seat cover

14. Cleaning & Maintenance

1

2

3

5

6

6

7

7

8

9

9

11 

13

15

Rear- facing installation (Group 0+)

Forward facing installation (Group I)

Child with a body weight between 

0-13kg (approx. Birth to 1 year)

Child with a body weight between 

9-18kg (approx. 9 months to 4 years)

1. This is a “Universal” child restraint. It is approved to ECE R44-04, for general 

use in vehicles and it will fit most, but not all vehicles.
2. A correct fit is likely if  the vehicle is capable of accepting a “Universal child 

restraint for this age group.
3. If in doubt, please contact manufacturer or retailer.

2. Understanding Your Vehicle

Summary of Contents for Transformers 0-4










Reviews: