background image

!

3

4

1) This car seat should only be installed by an adult and is suitable for children 

from 0 to 18 kg.
2) This car seat can be installed both forward and rear-facing using a vehicle 

3-point seat belt. Do not install this car seat in a forward facing position if your 

child weighs less than 9kg.
3) Never place the car seat on a vehicle seat with an active airbag.
4) Please follow the installation diagrams on the car seat or user manual when 

installing the car seat in your vehicle.
5) The car seat should be properly secured so that your child is well protected in 

the event of an accident.
6) Always keep the car seat secured in the vehicle even when it is unoccupied. 
7) For your child’s safety, do not use a damaged or second-hand car seat. This car 

seat should be changed timely when it has been subject to violent stress in an 

accident.
8) Never use the car seat without the cover.
9) Do not put your child at risk by using other replacement cover which could 

prevent the car seat from protecting your child as it should.
10) Please cover the car seat properly when the vehicle is parked under direct 

sunlight. The parts of the car seat that are not provided with a textile cover  

should be kept away from the sunlight, otherwise it may be too hot for your 

child’s skin.
11) The harness buckle cannot be in semi-locked state. Always ensure the car seat 

is secured before using. In case of emergency, your child can be taken out quickly.
12) Keep the car seat away from corrosive fluids. 

 

For your child’s safety, please read this 

user manual carefully. 

3. Safety Information

WARNING

13) Please keep the child car seat in a safe place when not in use. Do not place 

heavy objects on the car seat.
14) Please follow the installation instructions closely.  Do not allow the car seat to 

be jammed in the vehicle door, seat runners, etc.
15) Do not make any additions or changes to the car seat. Do not use other 

installation methods except for the instructions provided in the user manual.
16) Do not use any load bearing contact points other than those described in the 

instructions and marked on the car seat.
17) Any luggage or other objects liable to cause injuries in the event of collision 

should be properly secured.
18) Do not install car seat on an unlocked foldable vehicle seat as it may lead to the 

car seat losing its effectiveness in an emergency brake situation. 
19) Do not put any padding under the car seat to increase height because it may 

cause the car seat to lose its effectiveness in the event of an accident. 
20) Do not leave your child on the car seat unattended.
21) Please stop your vehicle in a safe area when your child accidentally unfasten 

the seat belt. Secure the seat belt properly before continuing the journey. 
22) Any straps holding the car seat to the vehicle should be tight. Any straps 

restraining the child should be adjusted according to the child’s body and not be 

twisted.
23) The lap section of the harness should be worn as low as possible, over your 

child’s hips. 
24) The user manual should be retained for the life span of the car seat.
 

Summary of Contents for Transformers 0-4










Reviews: