10
Snap Expansion S50 Quick Start Guide
FCC Notification
Authorized Service
Only an authorized service representative can service the Server. Failure to
comply with this requirement will void the warranty.
WARNING to Service Personnel
The Snap Expansion S50 has been tested and found to comply with the limits for a
Class “A” digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the
interference at their own expense.
Changes or modifications not expressly approved by Overland Storage could
void the user’s authority to operate the equipment.
Safety Precautions
Note
The maximum current draw is printed on the label on the back of the
storage subsystem.
Caution
Before touching any enclosure components, ground yourself and take
antistatic precautions. Overland Storage recommends that you use an antistatic
wrist strap and a grounding wire as minimum precautions.
Environmental Conditions —
Make sure the conditions of the environment in
which the server resides fall within the specifications for your model.
Installing the Enclosure —
During installation, make sure the enclosure is always
placed on a surface capable of supporting its weight.
Connecting to the Main Power —
Install the enclosure near an easily accessible
power source. Make sure the power source is the proper voltage for your model.
Place the power cord out of the way of traffic; do not place any object over the
power cord. Each storage subsystem
must
have a good electrical ground
connection through each power cord, through the building power grid to the
point of origin for the building power source entry.
If the enclosure is taken offline for an extended period, disconnect it from the
power source to avoid possible damage from a power surge.
Summary of Contents for Expansion S50 JBOD
Page 15: ......
