37
CALIBRATION
9. After the completion of a successful target ID the screen indi-
cates to lower the wheel. This is not necessary if the opposite
side target is needing to be ID, click on the
<OK>
button and
select the next target. Lower the wheels after all four targets
have been ID’d.
10. The program returns to the Target Selection screen to allow ad-
ditional targets to be ID’d. Repeat this process for all targets.
A green check mark appears next to the targets that have been
ID’d.
CAMERA VIEW
See the Diagnostic Chapter for details using “Camera View”
RCP Fixture Assembly
Summary of Contents for UHR Ultra
