Wi-Fi Connection / Troubleshooting
Add Network Advanced (Connecting to a hidden network)
128
2.
To connect, select your network from the available networks (
).
Figure 14-2
NOTES
A password is required when choosing a secured (protected) network.
Networks with a proxy, challenge page, or that require the user to accept terms
of usage are not supported.
Wi-Fi performance varies depending on your wireless network equipment and
ISP.
3.
Enter the required password and press
Next
, or select
Connect
to continue.
4.
Select
OK
to connect, or
Forget
to cancel.
–
The Snap-on Cloud registration information is displayed. For Snap-on Cloud
registration information see
–
If “Not Connected” is displayed, try to reconnect or see
for additional information.
14.3 Add Network Advanced (Connecting
to a hidden network)
The Add Network selection allows you to connect to a network that is not
broadcasting its name (not visible in the displayed network list). These networks are
also known as "hidden" networks.
To connect to a hidden network you will first need to know the following:
•
Network Security Type
–
Open (only need SSID)
–
WPA or WPA2 (Pre-shared key)
–
Note
-
WEP encryption is NOT supported
•
Network name or SSID (Service Set Identifier)
•
Network Password
Navigation
Home Screen:
Tools > Settings > Configure Wi-Fi
1.
To connect, select
Add Network Advanced
from the available network list.
2.
Select security type Open, WPA, or WPA2. Refer to the router user manual or
your IT administrator to determine the type.
3.
Enter the network name or SSID
4.
Enter the network password and press
Next
.
5.
Select
OK
to connect.
Network A
Network 1