Snap-On POLARTEK EEAC330 Manual Download Page 32

Page: 32 / 46

• 32 •

After few minutes, if no leaks are detected the following screen
will be displayed:

If leaks are detected the following screen will be displayed:

Check filter tightening and press ENTER to restart the pressure
check.

If no leaks are detected the following screen will be displayed:

Then After few minutes:

Press ENTER to return to the MAINTENANCE MENU; DRYER
FILTER CHANGE is now successfully completed.

DATABASE

From MAINTENANCE, select DATABASE.

A list of brand of vehicle will be displayed.

Select the brand of vehicle, (use the arrow keys to change page if
necessary), then select the model of vehicle.

All the information about this model is displayed:

Press ENTER to exit, or ESC to return back to previous screen.

EMPTY HOSES

From MAINTENANCE , select EMPTY HOSES, the following screen
will be displayed:

Make sure that HP and LP coupling are disconnected from A/C
system, open HP and LP side valves, then press ENTER to
continue:

The machine will recover all the refrigerant into the service hoses;
then the machine will sound an alarm and the following screen
will be displayed:

R134a

MAINTENANCE

psi

EMPTY HOSES

Empty hoses
Hoses pressure

Make sure that HP and LP coupling are disconnected from

A/C system, open HP and LP side valves

Press ENTER

to continue

EMPTY HOSES

R134a

MAINTENANCE

R134a

VEHICLE BRAND

         VEHICLE MODEL

         YEARS

         GENERAL INFO

         REFRIGERANT DATA

         OIL DATA

End of procedure

Press ENTER to continue

R134a

MAINTENANCE

CHANGE DRYER FILTER

PRESSURE LEAKS

Check filter tightening

and Press ENTER

R134a

MAINTENANCE

CHANGE DRYER FILTER

Internal gas removal

CHANGE DRYER FILTER

R134a

MAINTENANCE

Pressure check

CHANGE DRYER FILTER

R134a

MAINTENANCE

Summary of Contents for POLARTEK EEAC330















































Search results

Summary of Contents for POLARTEK EEAC330

Reviews:

Related manuals for POLARTEK EEAC330

Brands by name

Popular brands

Snap-On POLARTEK EEAC330, Manual

Search results

Summary of Contents for POLARTEK EEAC330

Reviews:

Related manuals for POLARTEK EEAC330

Brands by name

Popular brands