Snap-On Ethos-Tech User Manual Download

Page: 96 / 97

SureTrack Community

SureTrack - Online Community

SureTrack Results Page

Selecting an item from the Results Index page displays applicable repair information on the
SureTrack results page.

Figure 10-21

Information may include:

•

Real Fixes and Tips

- real-world fixes and repair tips captured from actual repair orders and

the experiences of professional technicians.

•

Common Repair Procedures Graph

- graphical display of the specific parts and

procedures most frequently used to fix the selected code or symptom.

•

Component Tests

- includes instructions on how to test the component, and descriptions of

component operation, component locations, test locations, connector end views and even
sample waveforms.

•

TSB's

- OEM technical service bulletins.

•

Safety Recalls and Campaigns

- safety recall and service campaign information.

Summary of Contents for Ethos-Tech


































































































Search results

Summary of Contents for Ethos-Tech

Reviews:

Related manuals for Ethos-Tech

Brands by name

Popular brands

Snap-On Ethos-Tech, User Manual

Search results

Summary of Contents for Ethos-Tech

Reviews:

Related manuals for Ethos-Tech

Brands by name

Popular brands