63
Maintenance
Battery Pack
10.4 Battery Pack
10.4.1 Safety Guidelines
IMPORTANT:
The battery pack contains no user serviceable components. Tampering with the battery pack
terminals or housing will void the product warranty.
Keep the following in mind when using and handling the battery pack:
•
Do not short circuit battery pack terminals.
•
Do not immerse the Thermal Imager or battery pack in water, or allow water to enter the
Thermal Imager or battery pack.
•
Do not crush, disassemble, or tamper with the battery pack.
•
Do not heat the battery pack to over 100°C (212°F), or dispose of it in a fire.
•
Do not expose the battery pack to excessive physical shock or vibration.
•
Keep the battery pack out of reach of children.
•
Do not use a battery pack that appears to have suffered abuse or damage.
•
Charge the battery pack using the appropriate charger only.
•
Do not use a battery charger adapter that has been modified or damaged.
•
Use the battery pack for the specified product only.
•
Store the battery pack in a cool, dry, well ventilated area.
Follow all safety guidelines when handling the battery pack. Read, understand and follow all
safety messages and instructions in this manual, and in the
Important Safety Instructions
supplied
with the Thermal Imager.
:$51 ,1*
Risk of electric shock.
• Prior to recycling the battery pack, protect exposed terminals with heavy insulating tape
to prevent shorting.
• Turn the tool off before removing the battery pack.
• Do not attempt to disassemble the battery or remove any component projecting from or
protecting the battery terminals.
• Do not expose the tool or battery pack to rain, snow, or wet conditions.
• Do not short circuit the battery terminals.
Electric shock can cause injury.
:$51 ,1*
Risk of explosion.
• Only use the Snap-on lithium-ion battery approved for this device. Do not use any other
battery or power adapter source. Incorrect replacement, charging, or tampering with the
battery pack may cause an explosion.
Explosion can cause death or serious injury.
