2
5. Press the
Down
control button to enter the Wi-Fi network
list, then use the
Up / Down
control buttons to select a
wireless network. Press the
Y
button to enable the
selection.
6. If a password is required when choosing a secured
(protected) network, enter the password using the
on-screen keyboard and the directional control buttons.
Select the “
enter/done
” key when finished (
).
Notes:
•
A password is required when choosing a secured
(protected) network. Enter the password using the on-
screen keyboard and then select the check mark on the
keyboard to continue.
•
Networks with a proxy, challenge page, or that require the
user to accept terms of usage are not supported.
•
Wi-Fi performance varies depending on your wireless
network equipment and ISP.
Figure 2
Wi-Fi Password Screen
When successfully connected to a Wi-Fi network, a check mark
will display on the Wi-Fi icon.
7. A confirmation screen displays showing the device serial
number, PIN and Code. These numbers are needed for
ALTUS account setup (
), see
Use the QR code to open ALTUSDRIVE.com on your
personal mobile device (
).
Figure 3
Wi-Fi Password Screen
For additional information on Wi-Fi, see the Diagnostic Thermal
Imager Elite user manual. User manuals are located at:
www.snapon.com/diagnostics/us/UserManuals
ALTUS Registration
IMPORTANT
- If you are a new owner of this tool (acquired
secondhand), you must register this tool with your ALTUS
account in order to transfer files to your account. If you do not
register the tool with your account, captured files will be sent to
the previous owners ALTUS account.
To use ALTUS:
•
The Diagnostic Thermal Imager Elite must be connected to
a Wi-Fi network, see
.
•
ALTUS registration is required.
–
If you are a new user, you will need to create a new
account, see
–
If you already have a SureTrack
®
.
ALTUS - New User Registration
If you are a new user, follow these steps to register and
create a new account:
1. Connect the thermal imager to a Wi-Fi network, see
Thermal Imager Elite Wi-Fi Connection on page 1
.
2. Write down the Serial Number, PIN and Code that are
displayed when the device connects to the Wi-Fi network,
or leave the screen displayed. These codes can also be
found in the Settings menu, see
3. Using a mobile device or PC, visit
https://ALTUSDRIVE.com
and select
Create Individual
Account
from the Login screen.
4. Enter the required information and create a
Username
and
Password,
then select
Create
.
5. At the “Success” confirmation screen, select
Done
.
6. Log in using your
Username
and
Password
.
7. Answer the security questions, then select
Submit
.
8. From “Technician Profile Manager” select the
Device
Management
tab. See
for
a description of this screen.
9. Select
Add Device
, then enter your
Serial Number
,
PIN
,
Code
, and
Device Name
and select
Save
when done.
10. Log out of “Profile Manager”, then select the
ALTUS Home
Page
browser tab to get started.
11. Turn the thermal imager off, and then on.
12. See
for operation instructions.
Your thermal imager is now registered to your ALTUS online
account. When connected to Wi-Fi, your images will be
automatically sent to the online account from the device.
i
Wi-Fi Password
i
Ok
Serial Number: 123HTM123456
PIN: 123456
Code: 5DED9GJ8
ALTUSDRIVE.com
If you’re a new owner of this tool please register your device at
ALTUSDRIVE.com, doing this will prevent files that you capture from
being uploaded to the previous owners account.
