
16
17
TREAD
READER
TM
HANDHELD • QUICK GUIDE
instructions above. Shake out any stones or grit. Close the wheel assembly
according the instructions above.
A calibration check piece is provided to ensure the scanner operates within
calibration. This is located at the base of the scanner compartment in its carry
case. To check calibration, place the scanner into its compartment in the carry
case.
Switch on
the scanner. Ensure the app is connected to the scanner.
1. Perform at least one scan, in either
direct
or
network
mode
2. In the
settings menu
, select
calibration
(see
page 09)
3. Press the
start calibration check
button.
4. The check will then be performed, and the
results displayed on screen to the user.
5. If the calibration check is successful, the device
may continue to be used.
6. If the calibration check is unsuccessful, the
scanner MUST be re-calibrated.
Calibration should be checked at least monthly. In the
event this product fails a calibration check, contact
TREAD
READER
TM
or an authorized distributor for
instructions on how to return for re-calibration.
16
• CALIBRATION CHECK
17
• PERFORMING A FACTORY RESET
18
• FURTHER INFORMATION
While the scanner is ON, hold simultaneously the POWER and wi-fi buttons for 5
seconds. The device will buzz for 3 seconds and switch off and restart automatically.
Please refer to
TREAD
READER
TM
for the
user manual
, which includes full user
instructions and troubleshooting.