background image

4

5

TREAD

READER

TM

 HANDHELD • QUICK GUIDE

Avoid shock and vibration to this product. Use the wrist lanyard provided to 

avoid droppage. Avoid continuous exposure to dust and liquid spray. Avoid direct 

exposure to aggressive substances, e.g. reactive chemicals, cleaning agents. 
Do not view the laser directly with an unprotected eye or optical instrument. 

Lasers are potentially hazardous to the eye. This product contains a Li-Ion 

battery. Do not heat or burn. Do not charge at temperatures below 0ºC (32ºF) or 

over 45ºC (113ºF).  Charge using manufacturer supplied charger only. 
This product contains a laser that could be damaged during unauthorized repair 

or disassembly, which could result in hazardous exposure to laser radiation. This 

equipment should only be serviced by an authorized service provider. Do not 

attempt to open this product as any warranty will be voided.

Use  of  this  product  other  than  as  specified  in  the

 user manual 

may 

result in hazardous radiation exposure. The user manual can be found at  

treadreader.com/library.

This product conforms to:
EU directive 2014/30/EU – Electromagnetic conformity
EU directive 2012/19/EU – Waste electrical and electronic equipment 

Snap-on Equipment S.r.l. Via Prov. Carpi, 33 2015 Correggio (RE) Italy

TREAD

READER

TM

 recommends only those applications of 

TREAD

READER

TM

 

tire  measurement  products  as  specified  within  TreadReader  product  literature, 

technical information, and warranty statements.

TREAD

READER

TM

 accepts no liability for use of its products in applications other 

than those for which they are designed. It is the responsibility of the driver, or 

vehicle owner, or operator, to ensure tires have sufficient tread depth, are defect 

free and are in a roadworthy condition.

01 • 

WARNINGS

03 • 

DISCLAIMER

04 • 

SAFE USE OF A LASER 

         PRODUCT

02 • 

CE MARKING AND  

         DECLARATION OF CONFORMITY

IEC 60825-1:2014 Safety of laser products

 was created to prevent accident by a 

laser product and to protect users. This regulation classifies laser products according 

to the level of hazard and provides safety measures for the respective classes. 

This product is classified 

Class 1 Laser product per IEC 60825-1:2014.

This product complies with FDA radiation performance standards 21 CFR Subchapter J.

CLASS

Class 1

Class 1M

Class 2M

Class 3B

Class 2

Class 3R

Class 4

DESCRIPTION OF HAZARD

Safe under normal conditions of operation

Safe under normal conditions of operation except for diverging or large area 
beams when collecting optics are used. Hazardous when collecting optics used.

Visible beam, low power. Blink response of eye affords protection. Hazardous 
when collecting optics used.

Direct intra beam viewing is hazardous.

Visible beam, low power. Blink response of eye affords protection.

Direct intra beam viewing is hazardous, but the risk is lower than Class 3B.

High  power.  Capable  of  producing  hazardous  diffuse  reflections.  Capable  of 
producing skin burns and fire hazardous.

Summary of Contents for 60100001











Reviews: