28 of 73
8.0 ACCESSORY INSTALLATION
Position lift to a
comfortable working height and place the lift on the
mechanical safety locks to continue with the installation.
8.1
Installation of Wheel Stops
Install the front wheel stops located in the accessory box by using three M14 hex bolts, washers,
and hex nuts located in the hardware kit for each runway.
See Figure 22
.
Figure 22 – Wheel stop Installation
The wheel stops are designed as a secondary means to restrain a vehicle from
inadvertently rolling off the runways. Property damage and physical injuries may
occur if this warning is not adhered to.
M14 Hex Nut
9-0315 (3pcs)
Ø14 Spring Washer
9-0393 (3pcs)
Ø14 Flat Washer
9-0392 (3pcs)
M14 Hex Bolt
9-0423 (3pcs)
Summary of Contents for EELR501A
