13
The charger has 2 LED indicators (12) which indicate the status of the charging process:
Red LED Status
Green LED status
Charger status
Off
Off
No power
Off
On
Standby mode:
-No battery is
inserted or,
-Battery inserted
but charging has
fi
nished
On
Off
Battery charging in
progress
• Fully charging the 2Ah battery may take up to 60 minutes.
• Fully charging the 4Ah battery may take up to 120 minutes.
After the battery is fully charged remove the charger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a longer period of time it is best to store the battery
in charged condition.
Removing and mounting accessories (fig. B)
Worn or damaged accessories must be replaced immediately.
Only use sharp and undamaged accessories.
• Release the quick change lever (5) and slide the accessory forward to remove from the holder.
• Slide the accessory in the holder and fasten the quick change lever (5).
The sanding pad and the sanding paper must be used for sanding applications.
Summary of Contents for BBT-ZOY01
Page 10: ...10 ASSEMBLY A 3 8 1 6 5 7 2 4 C 8 7 1 2 B 5...
Page 16: ......
