4. In the lower section of the screen, click "Learn about setting
up wireless network configuration" and complete the
wireless configuration according to the Help and Support
Center instructions.
Advanced Settings
Click the "General" tab (see the previous screen). In the "Connect
using" field, make sure that the adapter shown is the SMC2632W
V.2 Wireless PC Card.
1. Click "Configure." Click the "Advanced" tab.
2. Set the "Fragmentation Threshold." (The default 2,346 means
"Disabled.")
3. "Preamble Type" offers a dropdown list with three options:
Auto, Long, or Short. If you aren’t sure whether all the clients
and access points in your wireless network support the Short RF
preamble, then leave this setting on "Auto" (Default.)
4. "Rate (Mbps)" is the data transmission/reception rate setting.
It can be set to Auto, 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
Usually this should be set to Auto. In a radio frequency
hostile environment, a lower rate can provide more stable
transmission quality.
5. Set the "RTS Threshold" to the same as that used by
other devices in your network (The default 2,347 means
"Disabled.")
English
English
25
26
