Create with Passphrase
– Security keys for WEP encryption are
generated from your Passphrase string, so you must use the same
Passphrase on all the other stations in your network.
Manual Entry
– "Manual Entry" allows you to manually enter key
elements (two hexadecimal digits in each block.)
Default Key ID
– Choose the Key ID that has the encryption string
you prefer. If you are using a key generated from the passphrase,
you must use the same passphrase and key on each station. To use
the WEP function, take the following steps:
1. Select "128-bit" or "64-bit" in the "Encryption" field.
2. Choose "Create with Passphrase," type a string in the Passphrase
field, and click "Generate."
3. Select the key, and click "Apply."
Note:
A passphrase string can consist of up to 32
alphanumeric characters.
Or
1. Check "Manual Entry" and enter hexadecimal numbers into one
of the key fields. The bit key must be in hexadecimal numerals
(0~9, A~F, e.g., D7 0A 9C 7F E5.)
2. Click "Apply."
Advanced Screen
You can use this screen to set values for "Fragmentation
Threshold" (Default: 2346 means Disabled), and "RTS/CTS
Threshold" (Default: 2347 means Disabled).
English
English
21
22
