Smoothskin Bare FIT, User Manual

Page: 15 / 73

28 29
13. TROUBLESHOOTING
PROBLEM SOLUTION
The Activation Button Lights on the Handset do not light up when placed
against your skin.
Make sure the power supply is plugged in. Ensure the skin tone
sensor is fully pressed against the skin. Your skin could be too dark
for treatment. Check against the skin tone chart in the front of this
user guide.
The Activation Button on the Handset lights up white when placed on the
skin, but the Handset fails to flash when the Activation Button is pressed.
There could be a fault with the device. Unplug the device and
restart. If the problem persists, visit the website for support details.
The Activation Button Lights on the Handset are illuminated red
continuously, and the device will not function.
This indicates that there is a fault with the device. Stop using the
device and visit the website for support details.
The SmoothSkin Bare Fit handset, treatment window, power supply or
cable are damaged, broken, cracked or appear defective.
DO NOT USE. If you are in any doubt about the safety of SmoothSkin
Bare Fit or suspect it is damaged in any way, it must not be used,
and you should visit the SmoothSkin website for more information.
14. WARRANTY
We grant a 2 year warranty on the product starting on the date of purchase. Within the warranty period, we will check faults in materials or
workmanship free of charge and replace the complete device, at our discretion.
This warranty extends to every country where this device is supplied by CyDen or its appointed distributor.
This warranty does not cover damage due to improper use, normal wear or use as well as defects that have a negligible effect on
the value or operation of the appliance. The warranty becomes void if repairs are undertaken by unauthorised persons and if original
SmoothSkin Bare Fit parts are not used. To obtain service within the warranty period, please visit our website: www.smoothskin.com
To obtain service within the warranty period, please visit our website: www.smoothskin.com
15. LABELS AND SYMBOLS
NRTL Certification marking
Type BF Applied Part
Class II Equipment
Follow Instructions for use
WEEE waste disposal mark of
the European Union
European Conformity
Marking
Keep Dry
Australia Regulatory
Compliance Mark
Trefoil compliance mark for
Ukraine
China RoHS environmental
protection use period
FCC EMC compliance
for North America
Warning Optical Radiation
from device may cause
eye injury
SmoothSkin Bare Fit is marked with the following symbols:
FCC Statement:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV
technician for help.