6
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
5
–
Wire & Stationary Handlebar Assembly
a. Connect the
MIDDLE PULSE SENSOR WIRE(41A)
and the
LOWER PULSE SENSOR WIRE (42A)
.
b. Connect the
MIDDLE PULSE SENSOR WIRE(41B)
and the
LOWER PULSE SENSOR WIRE (42B)
.
NOTE:
Be careful not to pinch the
wires
c. Insert the
STATIONARY HANDLE BAR(7,8)
into the top tube on the
UPRIGHT POST(4)
with
2 x
BUTTON HEAD BOLTS(M6x12mm)(114)
and
2 x LOCK WASHERS(M6)(117)
.
NOTE Do not tighten
114 until the end of step 5.
d. Attach the bottom of
STATIONARY HANDLEBAR(7,8)
onto the
FRONT STABILIZER(3)
with
4 x
BUTTON HEAD BOLTS(M8x20mm)(115)
and
4 x LOCK WASHERS(M8)(108)
.
e. Fully tighten (114) and (115) bolts now.
NOTE:
Make sure the bolts are fully tightened before moving to
the next step.
S
TEP
6
–
Wire & Console Assembly
a.
Plug the
MIDDLE CONNECTION WIRE(38)
into the
UPPER CONNECTION WIRE(37)
. Connect the
MIDDLE PULSE SENSOR WIRE(41)
and the
UPPER PULSE SENSOR WIRE(40)
.
NOTE:
Be careful not
to pinch the
wires
b. Attach the
CONSOLE(46)
onto the
UPRIGHT POST(4)
with
2 x
SOCKET HEAD BOLTS(M8x25mm)(92)
and
2 x LOCK WASHERS(M8)(108)
.
Summary of Contents for CE-3.0DS
Page 37: ...36 PRODUCT PARTS DRAWING...