®
GT4
3
6. PRODUCT OVERVIEW
COMPONENT OVERVIEW
1 Base/Deck
2 Positive pole
3 Positive pole insolator
4 Hexagon socket screws (M2,5x4mm)
5 Hexagon socket screws (M2x3mm)
6 O-ring (NBR 70 19x1 mm)
7 O-ring (NBR 50 15x1 mm)
8 Liquidcontrol-ring (LC)
9
O-ring (NBR 70 17x1 mm)
10 Aircontrol-ring (AFC)
11 Positive pole screw
12 Insulator
13 Glass tank
14 Tank cover
15 O-ring (NBR 70 22x1 mm)
16 O-ring (NBR 70 21x1 mm)
17
Chamber/Chimney
18
Top cap
19
O-ring (NBR 70 17x1 mm)
20
O-ring (NBR 70 8x1 mm)
21
Drip tip
22
O-rings (NBR 70 5x1)
7. START UP
ATTACHING A COIL
Screw the tank section from the base and
unscrew the required hexagon socket screws.
Insert the coil and fix it at the contact points
with the hexagon screws
Cut off the wire ends.
Let the coil light up slightly
(uniform glow pattern)
WARNING
• Use an ohm meter to check the resistance of the coil/device before using it. Don’t use the device, if a short circuit is de-
tected. This could lead to battery damage. Check if there is a contact between the coil ends and surrounding parts.
!
1
2
3
