®
GT4
4
INSERT COTTON
Cut off an approximately 4 - 5 cm long strip of
cotton and sharpen it at one end.
Now pull the cotton through the coil and
push the cotton ends into the pockets.
The cotton should cover the liquid openings
well from the inside.
Moisten the cotton with liquid and
screw the tank section onto the base.
FILLING THE TANK
Before you fill the tank, the liquidcontrol
should be closed (liquid holes covered).
To fill, unscrew the top cap partially or completely.
Now the top cap is screwed on again.
The liquidcontrol has to be opened again,
before using.
WARNING
• Always make sure that the tank is filled sufficiently to avoid dry hit.
• Make sure that no liquid gets on your skin, otherwise wash these areas thoroughly.
!
1
2
3
1
2
3
