9
Assembly
Note:
Carefully cut the tape holding the carton together. Cut the carton so that it can lay flat on
the ground to provide a clean surface for assembling your Grill. Remove the packing materials
and all the parts from inside the Cabinet. After unpacking all the parts, check to make sure you
HAVE all the parts. If anything is damaged or missing, contact our toll free number: 866-475-
5180. Discard all packing material in a safe and recyclable manner. Save this Assembly Manual
for future reference.
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
Step 2: Right Front Leg and Right Rear
Leg Assembly
Locate:
Right Front Leg - Blue label #2, Right
Rear Leg - White label #1, (4) M6x12 bolts.
Note
- each leg will have an identification label on it.
Procedure:
Refer
to
Fig
.
2
–
Place upside
down, attach the Right Front Leg #2 and Right
Rear Leg #1 to the Cabinet using (4) M6x12
bolts.
Step 2
Step 1
Step 1: Left Front Leg and Left Rear Leg
Assembly
Locate:
Gas and Charcoal Grill Cabinet, Left
Front Leg - Green label #4, Left Rear Leg - Yel-
low label #3, (4) M6x12 bolts.
Note- each leg will
have an identification label on it.
Procedure:
Refer
to
Fig
.
1
–
Place the Cabinet
vertically and keep the Gas Cabinet up, attach the
Left Front Leg #4 and Left Rear Leg #3 to the
Cabinet using (4) M6x12 bolts.
Fig. 2
Fig. 1
Grill
Front
Grill
Back
Grill
Back
Grill
Front
