24
Assembly
Step 29
Fig. 27A
Fig. 29
Step 30
Fig. 29
Fig. 30B
Fig. 30A
Step 29: Attach Control Knob
Locate
: (1) Control Knob
Procedure
: Refer to Fig. 29, Place (1) Control
Knob over the Side Burner Valve Stem, making
sure to align the flat portion of the stem with the
flat potion in the Knob and push the Control
Knob onto the valve stem until it is firmly
seated.
30: Attach the LP Gas Cylinder Wire Re-
tainer
Locate
: LP Gas Cylinder Wire Retainer
Procedure
:
Attach retaining wire to legs at left end of grill.
Position the retaining wire inside the legs and
under the grill body with the curved side up.
Then insert the ends of the wire through the
holes in the legs and rotate the wire toward you
as shown as Fig. 30A and Fig. 30B.