Assembly
Step 27: Attach handles to Drip Trays
Locate:
(1) Gas Side Drip tray and (1) Char-
coal Side Drip Tray, (4) Handle Stand-offs,
(8) M6x15 bolts,(2) short handle tubes, (1)
removable Grease Cup
Procedure:
Refer to Fig. 27A - Place (2)
M6x15 bolts through the holes on one side of
the Trays. Fit a Handle Stand-off over the
bolts and attach the Stand-off to the Drawer.
Fit the Short Handle Tube into both Stand-
offs and then repeat the procedure of insert-
ing the screws through the Trays and into the
other Stand-off. Tighten all (4) bolts securely.
Refer to Fig. 27B Note: The Gas Side Drip
Tray has a removable Grease Cup attached
to the underside. This tray MUST be used
only on the Gas Side of the grill.
Refer to Fig. 27C – The removable Grease
Cup slides into the bottom of the Gas Side
Drip Tray, from the front.
Note: Grease Drip Trays and Grease Cup
Should be emptied and cleaned after each
use to prevent flare – ups and /or grease
fires.
Step 27
Fig. 27 A
Gas Drip Tray
Charcoal Drip Tray
Fig. 27 B
Fig. 27 C
Step 28: Attach Handle to Damper
Locate
: Damper Knob Handle
Procedure
: Refer to Fig. 28 – screw the
Damper Handle Knob onto the Damper
Slide.
Step 28
Fig. 28
Charcoal Drip Tray
Gas Drip Tray
26
