Assembly
Step 19: Attach the Handle to the Firebox
Lid and the Firebox to the Grill Assembly
Locate
: Firebox and Lid Assembly, (2) Han-
dle Stand-offs, (1) Short Handle Tube, (10)
M6x15 bolts, and (6) KEPS nuts
Procedure:
Refer to Fig. 19A. Open the Fire-
box Lid and place (2) M6x15 bolts through
the Lid holes on one side of the Lid. Fit a
Handle Stand-off over the bolts and attach
the Stand-off to the Lid. Fit the Short Handle
Tube into both Stand-offs and then repeat
the procedure of inserting the screws through
the Lid and into the other Stand-off. Tighten
all (4) bolts securely.
Refer to Fig. 19B and Align the Firebox As-
sembly with the rectangular opening in the
right side of the Grill Cabinet, so that it is
resting on the ledge of the Firebox Support
Bracket. Insert (3) M6x15 bolts through the
Firebox and the Cabinet Wall. Attach (3) M6
KEPS nuts to each of the bolts. Insert (3) M6
x15 bolts through the Firebox and the Fire-
box Support Bracket and attach (3) KEPS
nuts to the bolts. Make certain that all bolts
are securely tightened.
Step 20:
Attach the Firebox Door Handle
Locate
:
Firebox
and Lid Assembly, Firebox
Door Handle, (1) M6x15 bolt and (1) Metal
lock nut
Procedure
: Refer to Fig. 20 and Place the
Firebox Door Handle on the outside of the
Firebox Door and insert an M6x15 bolt
through the Door Handle and the Door as
shown. Attach an M6 metal lock nut. Tighten
with wrench or pliers until the Handle can still
move freely.
Step 19
Fig.19 A
Fig.19 B
20
Step 20
Fig.20
