SMK P100AC Operator'S Safety And Service Manual Download Page 6

Page 11 

!

   

 

C A U T I O N

   

 

!

 

IT IS YOUR RESPONSIBILITY TO ENSURE THAT THE 
MATERIAL YOU ARE SPRAYING IS COMPATIBLE WITH 
THE PUMPS COMPONENTS. 

!

   

 

C A U T I O N

   

 

!

 

If the product being sprayed is intended to cure or 
set up after application, the Sprayer must be 
cleaned.  Flush with Xylene for 60 seconds or more. 
Leave Xylene in pump until next use. Failure to 
clean the unit after using these types of materials 
will result in failure of the unit and loss of warranty 
coverage. 

Do not run dry or use abrasives 

Never use without Intake Filter 

If Switch light flickers, reduce pump speed 

Attempting to spray liquids below the manufactures 
recommended temperatures may affect the sprayers 
ability to adequately perform. Low temperatures 
may affect your materials viscosity. 

Do not submerge or expose to excessive moisture 

Do not spray liquids with high solids (0ver 35%) or 
abrasive additives as this will destroy the pumps 
gears and will void the warranty. This Sprayer is 
intended for and was tested with Chemicals used for 
curing and sealing applications. If you are unsure of 
the suitability of the product you want to spray 
contact SMK at 515-202-0052 for assistance.   

Page 4 

Warranty 

!

   

 

C A U T I O N

   

 

!

 

DO NOT ATTEMPT TO SERVICE THE UNIT BY REMOVING 

THE COVER. REMOVAL OF THE UNIT COVER WILL VOID 

THE WARRANTY. CALL THE SERVICE CENTER.

 

SMK Industries warrants this product to be free from 
material or workmanship defects for a period of 60 days 
from the date of manufacture. Alternatively, 60 days from 
purchase, not to exceed one year from date of 
manufacture. 
Warranty does not apply when: 

Unit is not used within the guidelines of this 
manual. 

Product or Parts are used or installed outside 
the SMK authorized service center. 

Incompatible fluids are used. 

Misuse or Abuse. 

Improper or inadequate cleaning of unit after 
use. 

In the event you need to utilize this warranty, the product or 
part must be returned for examination, postage prepaid, 
direct to the SMK Industries service center as instructed by 
calling 515-202-0052.  Proof of purchase date and an 
explanation of the claim must accompany the 

Summary of Contents for P100AC










Reviews: