WWW.SMITTYBILT.COM
NOTE:
Carefully read entire instructions thoroughly before attempting to install this part.
Photos are for illustration purposes and actual product may vary. Install remains the same
15
Step 1:
Assemble main veranda pole. Short poles will slide onto the
main hoop and secure with push pins. Make sure pins line up with the
holes in the poles and are completely engaged. Fig 1&2.
Step 2:
Position main assembly into the corners of the veranda. Once in
position, install the ends of the main assembly into the retaining socket
on the inside corner of the tent. Make sure you do not catch the tent
fabric inside the tube. DO NOT install assembly into the socket and then
try to pull veranda over assembly, damage will occur. Always position
assembly inside the fabric and then install into sockets. Fig 3&4.
Fig 1
Fig 2
Veranda Support
XL models
Periodically check torque
of all hardware.