RioOutdoors 6S-DH Installation Instructions Manual Download

Page: 1 / 31

1 |

P a g e

Installation Instructions

6S-DH

6x6 Surface Mount Dual Header Raftered Pergola Kit

Pergola Kits

WARNING:

If the information in these instructions is not followed exactly, weakening or failure of the erected

structure may result causing property damage, personal injury, or loss of life.

All brackets designed and sold by RioOutdoors.com are to be used for building pergolas only and are not to be used for

other structure construction purposes.

•

Thoughtfully engineered

Brackets eliminate all

wood-joinery skills

requirements.

•

Skills required: drill

holes in concrete and

hammer in anchors,

drilling pilot holes and

driving lag screws into

lumber.

•

Easy lift and place U-

channels eliminate

need for lifting

equipment. Super-easy

assembly work.

•

Self-aligning design

squares up structure

automatically.

•

Estimated Assembly

Time is less than 1-1/2

hours.

Figure 1: Items included in the kit, (

𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷

𝑄𝑄𝑄𝑄𝑄𝑄𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝐷𝑄𝑄

)

Items not included in this kit: wood, tools, some hardware.

Summary of Contents for 6S-DH
































Search results

Summary of Contents for 6S-DH

Reviews:

Related manuals for 6S-DH

Brands by name

Popular brands

RioOutdoors 6S-DH, Installation Instructions Manual

Search results

Summary of Contents for 6S-DH

Reviews:

Related manuals for 6S-DH

Brands by name

Popular brands