Page 1 of 9
6/3/09 Rev 1 (DP)
PARTS LIST:
1 Driver Front Leg (A)
6
Peel & Stick Foam Gaskets for Front Legs and
Short Rear Mounting Brackets
1 Passenger Front Leg (B)
6 12mm Rubber Plug/Grommets
1 Driver Rear Top Leg (C)
4 12-1.75mm x 35mm Hex Head Bolts
1 Passenger Rear Top Leg (D)
4 12mm ID x 32mm OD x 3mm Flat Washers
1 Driver Rear Bottom Leg (E)
4 12mm Lock Washers
1 Passenger Rear Bottom Leg (F)
4 10-1.50mm x 35mm Hex Head Bolts
2 Short Rear Mounting Bracket (optional drill mount) (G)
4 10mm ID x 27mm OD x 3mm Flat Washers
2 Metal Plates (optional drill mount) (H)
4 10mm Lock Washers
6 Knobs with 8mm Nylon Locking Hex Nut (I)
6
8-1.25mm x 70mm Allen Bolts (for Cross Rail
use only)
1 Front Cross Bar / Light Bar (J)
10 8-1.25mm x 65mm Allen Bolts
1 Rear Cross Bar / Light Bar (K)
12 8-1.25 x 35mm Hex Bolts Grade 10.9
1 Front Basket Holder Cross Rail (Short) (L)
8 8mm x 24mm OD x 2mm Thick Flat Washers
1 Front-Center Basket Holder Cross Rail (Mid Length)(L) 40 8mm x 16mm OD x 1.6mm Flat Washers
1 Rear Basket Holder Cross Rail (Long) (L)
8 8mm Lock Washers
2 Side Rails (M) 14 8mm Nylon Lock Nuts
2 12mm Double Nut Plates (N)
2 ST # 5 x 30mm Sheetmetal Screw
2 Rubber Bumpers
2
ST 9.8mm OD x 5.4mm ID x 1.1mm Flat
Washers
2 2” Plastic caps for bottom of front legs
CAUTION: Recommended load rate is 350 lb. Too much weight will greatly reduce the stability of your
vehicle and increase the vehicle’s tendency to overturn. The manufacturer makes no representation or
warranty as to the amount of weight that your vehicle can safely carry. For guidance, we recommend that
you consult the vehicle manufacturer. Secure all payloads properly for safe transportation.
The Rock Crawler Roof Rack is NOT designed as a roll over roll bar.
NOTE: The "no drilling required, bolt-on" bottom rear leg mounts, (E & F), of your new Rock Crawler Roof
Rack are designed to work with aftermarket bumpers only and are not compatible with the factory bumper.
