CONTROL DESCRIPTION
1.
SPINDLE MOTOR SWITCH.
•
Rotate clockwise for forward and counter clockwise for
reverse. Center position is off.
2.
SPINDLE SPEED SELECTOR HANDLES.
•
Two control levers give a total of 6 speeds. The speed chart is
on the front of the mill head.
3.
QUILL DEPTH LOCK.
•
Use to lock the quill in the desired vertical position.
4.
DEPTH GAUGE STOP KNOB.
•
Use to set the depth gauge for stopping the quill at a desired
amount of travel. The scale is directly above the adjustment
knob
5.
Z AXIS DRO.
•
Gives a digital position of the quill.
6.
X AXIS FEED HANDLES.
•
The dial behind the handle is graduated in .001” increments
for precise movement.
7.
Y AND X AXIS LOCK HANDLES.
•
Locks the X or Y axis in place to prevent unwanted movement.
8.
Y AXIS FEED HANDLE.
•
The dial behind the handle is graduated in .001” increments
for precise movement.
9.
MILL HEAD VERTICAL CRANK.
•
Used to raise or lower the entire mill head. Be sure to lock the
Z axis lock #13 before using the mill.
10.
Z AXIS COARSE FEED.
•
Use to feed quill like a drill press.
11.
FINE FEED ENGAGEMENT KNOB.
•
Turn the knob all the way clockwise to engage the fine feed for
the quill. Turn the knob counter clockwise to disengage the
fine feed and use as a drill press.
18
Summary of Contents for MI-329M
Page 1: ...Smithy MI 329M Operator s Manual 1 ...
Page 30: ...Chapter 13 Diagrams and Parts Listings 30 ...
Page 33: ...33 ...
Page 37: ...37 ...
