9
Using the Power Pack or AC Adapter
Depending on your delivery, your clinician may give you a
rechargeable Power Pack or an AC Adapter to power your pump. For
complete instructions, you should also read the Instructions for Use
that come with the Power Pack or AC Adapter.
The cord from the Power Pack or AC Adapter plugs directly into the
“Power” jack on the side of your pump.
NOTE:
A good 9V battery must also be installed in your pump as a
backup. Otherwise, you won’t be able to start the pump. Your Power Pack
or AC Adapter may or may not have the connector shown.
1. Open the “Power” cover on
the side of your pump.
2. Line up the red mark on the
Power Pack cord connector
with the red mark on the
pump’s Power jack.
3. Push the connector forward
until it stops. Do not twist
or turn the connector. Pull
lightly on the cord directly
behind the flared part of the
connector to make sure it is
firmly attached.
CAUTION: Failure to push the connector all the way forward may
result in an intermittent connection, and the connector may
dislodge, causing a loss of power.
Power Jack
Red Mark
40-3665-01G PIG, Prizm TPN,VIP.indd 9
6/14/2011 10:50:24 AM
Summary of Contents for 6100
Page 31: ......
