manualshive.com logo in svg

Smiths Medical 1884SS, Operation Manual

Share
Download
Smiths Medical 1884SS Operation Manual Download Page 47

Appendix A

Pulse Oximeter for Sleep Screening Operation Manual 

A-1

Description

The device will send out Trend Data to a PC through the sensor connector.  To accomplish this, 
the sensor must be disconnected from the device.  Additional cables are required to connect 
the device to a PC.  The communication device will be dormant if the system is not in the Trend 
Printing Mode.

Alternative PC Communication Setup (Not Using 1621 Software)

The following items will be needed:

Printer Adapter Cable (Catalog No. 3350)  

DB-9 Modem Cable  (Catalog No.3339)

NOTE!  The DB9 PC Adapter Cable is an industry standard RS-232 null modem cable.

Power up the monitor.

Connect the printer communication cable labeled “BCI” to the monitor.

Connect the standard RS-232 null modem cable’s DB-9 connector to the mating connector of 
the printer cable labeled “Printer”.

Connect the standard RS-232 null modem cable’s DB connector to the mating connector on 
the PC.

NOTE!  The DB-9 modem cable is an industry standard RS-232 null modem cable.

Figure A.1: PC Communication Setup

•

•

1.

2.

3.

4.

Appendix A:  Data Format

%SpO2

B P M

x

F

Printer 

Cable

DB-9 Null 

Modem 

Cable

DB-9 Printer 

Connector

Summary of Contents for 1884SS





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands