manualshive.com logo in svg

Smiths Medical 1884SS, Operation Manual

Share
Download
Smiths Medical 1884SS Operation Manual Download Page 12

Chapter 1: Introduction

1-4 

 

 

 

 

Pulse Oximeter for Sleep Screening Operation Manual

Cautions

CAUTION!   Do not autoclave, ethylene oxide sterilize, or immerse the sensors in liquid.  

Evidence that liquid has been allowed to enter the monitor voids the warranty.

CAUTION!   Connect only the PC cable specifically intended for use with this device (see 

Optional Supplies and Accessories

).

CAUTION!   When printing, or advancing the paper, place the oximeter on its’ side to prevent 

paper jams. 

CAUTION!   Chemicals used in some cleaning agents may cause brittleness of plastic parts. 

Follow cleaning instructions in this manual.

Notes

NOTE!   Batteries are designed to be replaceable by individuals trained in this procedure. 

Follow local governing ordinances and recycling instructions regarding disposal or 
recycling of device components, including batteries. 

NOTE!   SpO

2

 averaging is the number of pulse beats over which the SpO

2

 value is averaged; 

pulse averaging is the number of seconds over which the pulse value is averaged.

NOTE!   All user and patient accessible materials are non-toxic. 

Summary of Contents for 1884SS





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands