Smiths detection eqo, Operating Instructions Manual

Page: 55 / 70

Operation
Operation
Conducting the person into the scanning area
CAUTION
Risk of falling!
When walking through the arch there is a potential trip
hazard. Persons to be scanned should be made aware of
this!
Important!
In the following one screening process will be explained.
Please remember that this is only one possible concept
of operation (CONOPS) for the eqo system. Depending
on your requirements your CONOPS can be different
from the described CONOPS below.
Direct the person to be scanned through the arch, into the scan-
ning area.
The optimum position for the person is marked by a symbol on
the floor mat. The person should stand in front of the flat scan-
ning panel with arms down, facing the local operator.
Important!
Remember that the minimum distance between the per-
son to be scanned and the flat scanning panel of the
eqo system is 30 cm. The person should stand at the
centre of the operational area as indicated by the sym-
bol on the floor.
Screening process
Important!
When the eqo system is configured with a remote sta-
tion, starting the screening process is only possible as
long as the remote operator station is in “Ready”-state.
When the remote operator is inside a menu, and the loc-
al operator presses
T
, a message at the local sta-
tion's screen is displayed indicating that the remote sta-
tion is busy.
Press
T
at the local station to start the screening process.
The image capturing begins.
95591706 11/02/2010 © smiths detection proprietary information
Fig. 71: Local operator directing a person into
the imaging volume
49
Fig. 72: Local station's main screen when
system configured with remote station