Smiths detection eqo, Operating Instructions Manual

Page: 47 / 70

Start up
Switching on the remote station
Turn the key switch of the remote station clockwise (into pos-
ition II) in order to switch on the unit (see Fig. 57). The key
switch will backslide automatically to position I and the green
LED
lights up.
After the initial boot sequence, a splash screen will appear (see
Fig. 61) on the monitor, which will clear after approximately five
minutes when the system has started. During that time the remote
station is performing several start-up activities. The text on the
progress bar reflects the system start-up activities.
One of these start up activities is to search for a local station to
connect to. If the remote station locates the local station it estab-
lishes a connection and a message box is displayed, that a connec-
tion to an eqo local station has been established (see Fig. 59).
Acknowledge this message by pressing
T
.
At the same time a message will appear at local operator station
which informs the local operator that a remote station has made a
connection to the local station.
Acknowledge this message by pressing
T
.
95591706 11/02/2010 © smiths detection proprietary information
41
Fig. 57: Key switch of the remote station
Fig. 60: Connection established with remote
station
Fig. 59: Connection established to local station
Fig. 58: Splash screen