Assembly Instructions
Document #: 179717
REVISED: 11/2021
1. Place wood top on clean smooth surface upside down with the pilot holes facing up,
fasten 2x item #7 to item A using 4x fasteners item #1 using the supplied T25 Torx bit
item # 4.
2. Position Panel B as shown, centering the panel to create equal gaps, a spacer or
credit card works well. Fasten panel #7 to item A using 4x fasteners item #1 using the
supplied T25 Torx bit item # 4. NOTE: The panel should sit on the metal finger as
shown.
