Assembly Instructions
Document #: 179717
REVISED: 11/2021
15. Place item #6 as shown, Fasten #6 to the tube of item #3 using 2x fastener #3, finger tighten only.
Install 2x fastener #2. (Fastener #2 is a self drilling fastener, it will create 2 new holes in item 19179)
Confirm there is a constant gap between 19179/19178 and the tube of item #3. Tighten the 2x
fastener #2.
14-B.
This step is for 58003 and 58007 only.
Remove all components from inside 19178 before inverting. Remove panel A assembly and set to the
side. Position 19178 front face is flush with the edge of wood as shown below, allow for a small gap
between the tube of item #3 and hinge. (door is shown removed for illustrative purposes), install 6x
fastener #1 in the 6x holes of 19178 as shown.
Line up face
this this edge
Allow for a small
gap between hinge
and this tube
