34
www.smith-root.com
LR-24
BACKPACK ELECTROFISHER
5. Press the Volts key and use the Arrow keys to scroll to the
desired voltage and then press the Enter key (
Fig. 5.26
).
6. Press the Power Limit key and use the Arrow keys to scroll
to the desired power limit and then press Enter (
Fig. 5.27
).
7. Repeatedly press the Up arrow key until the Secondary
Waveform parameters are displayed. Repeat steps 2
through 6 for the Secondary Waveform.
8. Begin electrofishing.
9. Duty cycle and frequency can have a huge impact on taxis.
In general, lower frequencies are safer for larger fish than
higher frequencies. If you are not getting any response
from fish, change the LR-24 settings according to adjust-
ments a, b, and c on page 27.
SECTION 5: SETUP AND OPERATION (CONT.)
Voltage
150V
Fig. 5.26
Voltage
150V
Fig. 5.27