SMERI PLUR Series, User Manual, Page: 16 / 25

- 16 -
normally.
Ba
sic
Se
tu
p
1.
PV Select
Press MOV
，
select PV from Level or
Distance.Change affects
measurement information Page, and
the current output corresponding to it.
2.Level Unit
Press MOV
，
switching between m
and ft
，（
the default unit is m
）
Change affects measurement
information Page, and change all the
Settings about the level or distance
values.
3.Install Height
From the probe emission surface to
the lowest liquid/solid level. Unit
depends on the level unit settings.
4.Full Scale
The PV value(level/distance value)
corresponding to 20 mA output
current
(Unit depends on the level unit
setting,the number of digit depends
on the sensor type
）
5. Zero Scale
The PV value(level/distance value)
corresponding to 4 mA output current
(Unit depends on the level unit
setting,the number of digit depends
on the sensor type
）
Modbus Setup
After finish the part MODBUS setting ,communication function can be normal
use.