- 13 -
value, the sensor state, the bar chart, and the relay state. Other
information pages can display the distance value,probe temperature and
output current.
The main measurement page (display content sample is as follows):
Graphic description:
1
PV indicator:
indicator is the main variable is the Level or
Distance(depends on the setting ), current output corresponding to it.
2
Level/Distance value:
real-time display of the current instantaneous
level value/Distance value, decimal point position is automatic
adjustment.
3.
Relay state
: When an alarm condition is reached according to the
relay setting, 1-6 high or low relay alarm icon would be shown here.
4.
The sensor status
:
flashing show host and probe communication
is normal, and the echo is normal.
icon shows probe has no echo.
icon shows the host couldn’t detect the probe.
5.
PV bar
:PV bar chart corresponding to PV value.
6.
PV units
: Display PV unit (m/ft) , can be modified in the Settings.
7.
PV percentage
:The PV percentage.
Relay Alarm display:
Relay 1,3 achieve high operating point setting (high alarm)
Relay 2 reaches the low operating point (low alarm)
Other measurement information page (display content sample is as
follows):
In the main measurement page press the SEL button to enter into other
measurement information page, press SEL button again to return to the
main measurement page or it will automatically return to the main
measurement page after 60s.