background image

Use

17

EN

3.2 Using the accessories

Racks and trays

Racks and trays have to be inserted into the 
side guides until they come to a complete 
stop.
•  The mechanical safety locks that prevent 

the rack from being taken out 
accidentally have to face downwards 
and towards the oven back.

3.3 Using the hob

All the appliance’s control and monitoring 
devices are located together on the front 
panel. The burner controlled by each knob 
is shown next to the knob. The appliance is 
equipped with an electronic ignition device. 
Simply press the knob and turn it 
counterclockwise to the maximum flame 
symbol, until the burner ignites. If the burner 
does not light in the first 15 seconds, turn the 

knob to 

 and wait 60 seconds before 

trying again. After lighting, keep the knob 
pressed in for a few seconds to allow the 
thermocouple to heat up. The burner may 
go out when the knob is released: In this 
case, the thermocouple has not heated up 
sufficiently. 
Wait a few moments and repeat the 
operation. Keep the knob pressed in 
longer.

Gently insert racks and trays into 
the oven until they come to a stop.

Clean the trays before using them 
for the first time to remove any 
residues left by the manufacturing 
process.

In case of an accidental switching 
off, a safety device will be tripped, 
cutting off the gas supply, even if 
the gas cock is open. Return the 

knob to 

 and wait at least 60 

seconds before lighting it again.

Summary of Contents for SSA60MA9











































Reviews: