Instructions for the user
90
10.7.2 Setting the automatic cleaning cycle (pyrolysis - on some models only)
• Position the oven function selector to the pyrolysis function symbol
; the
programmer will increase its light intensity;
• Press and hold the end of cooking
key
and simultaneously press
and
to increase or decrease the
cycle time (the minimum period of
pyrolysis is 1 hour and 30 minutes,
with a maximum of 3 hours). The set
minutes will be shown by the external
segments of the clockface lighting up,
while the hours will be shown by the
relevant numbers flashing (1, 2 or 3).
The illustration shows a pyrolysis
process set for 2 hours and 40
minutes;
• Once the automatic cleaning cycle time has been set, the oven will start to
heat up (approx. 10 seconds after the last action by the user), the oven
thermostat light will start flashing and will become steady once the oven has
reached an internal temperature of approx. 470°C;
• The door lock light will come on and remain lit until the end of the automatic
cleaning cycle;
• The door lock will be activated within approx. 1 minute 30 seconds after the
last action by the user, shown by the relevant light coming on and the
number 12 flashing on the display;
• When pyrolysis begins, the numbers showing the hours will continue to flash
while a second hand turns anti-clockwise to indicate the time remaining until
the end of pyrolysis. The external segments of the clockface which are lit up
to indicate the minutes will go out one by one as each minute passes.
At the end of the automatic cleaning cycle, all the numbers will flash and a
buzzer will sound to indicate the end of the cycle. The door lock light will
remain lit and it will not be possible to open the door until the temperature
inside the oven falls below 300°C. Once pyrolysis is complete, set the
function selector to off.
