Instructions for the user
74
Cooking start:
as well as setting a cooking duration, the cooking start time can
also be set (with a maximum delay of 12 hours in relation to the current time). To
set the cooking start/end time, proceed as follows:
• Set the cooking duration as described in the previous point;
• Press
again and hold it. The current time will appear on the display: use
or
to set the cooking start time;
• A few seconds after the last pressure, the display will indicate the cooking
start time;
• At the start of a programmed cooking process, the small circle between 12
and 1 will also light up to indicate that a programmed cooking process is
taking place;
• Press
at any time to see the current time. After a few seconds, the display
will again show the cooking start time;
• At the end of the cooking time, the timer will switch the oven heating
elements off, the buzzer will start to sound and the numbers on the dial will
flash;
• To reset the whole set program, keep the central key
pressed for a few
seconds: if cooking has already started, the oven will have to be switched off
manually.
At the end of the programmed cooking time, the oven must be reset to
manual by pressing for a few seconds.
Warning: for the oven to start cooking operations after the programming
procedures described above, the thermostat and function selector knob
must be correctly set to the desired temperature and function.
7.2.4
“DEMO” Function
Models with the analogue/digital programmer feature a "DEMO" function which
deactivates the heating elements while leaving the other functions unchanged.
To activate it, simply press
,
and
for a few seconds. A confirmation
beep will inform the user that the function is active.
Once the display is showing the current time with demo function activated, the
number 6 will flash.
To deactivate it, simply repeat the same procedure.
