79
Instructions for the user
11.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed acording to the dimensions shown in Figures
1
,
2
and
3
. For installing under a work top, follow the dimensions given in
Figure
1
-
3
. When installing under worktops incorporating combined hobs,
a gap of at least 110 mm must be left from any side wall, as shown in
figure
1
.
When installing in tall units, comply with the dimensions shown in figure
1
-
2
, bearing in mind that the top/rear of the unit must have an opening
80-90 mm deep. Tighten the 4 screws
A
inside the frame (fig.
1
). For
installing beneath a non-integrated top, allow for a rear and bottom
clearance as shown in Figure
1
(ref.
B
). See relevant instructions for fitting
and securing the cook top.
