Installation
31
EN
Australia fitting
New Zealand fitting
U.L.P.G.
When connecting the appliance
to a portable LPG cylinder, the minimum
capacity of the cylinder should be 4 kg and
the maximum capacity should be 9 kg. Fit
the hose and regulator supplied with the
barbecue and ensure that the nut on the
hose is tightened using a spanner. Do not
use thread tape, as the connection will seal
properly without it. When connecting the
regulator end of the hose to the gas
cylinder, turn the fitting anti-clockwise and
hand tighten only.
DO NOT USE A SPANNER
.
When connecting the barbecue to a fixed
LPG supply, it must be installed by a
licensed gas fitter in accordance with
requirements of AS5601 and local gas
authority requirements.
ULPG Hose Dimensions
According to AS1869 Class ‘A’, 10 mm diameter
Length 1000 mm
The hose must be fitted or replaced
(check its expiration date
periodically) in compliance with
the relevant regulations.
WARNING - In freezing
conditions the pressure of propane
or butane gas can be reduced in
the gas cylinder, causing a lack of
gas pressure. This may affect the
way the barbecue operates.
