15
Operation
Model with electronic controls
A -
Lighting, on/off.
B
- Fan off (Stand by)
C
- Timer for selected speed (visualizes the speed
selected and flashing LED on the lower side of the
display).
This knob permits the operation of the cooker hood
for a established period:
20 minutes if the speed selected is
1
15 minutes if the speed selected is
2
10 minutes if the speed selected is
3
5 minutes if the intensive speed
P
is selected.
D
- Display showing:
Fan speed (1-3-P).
Change grease filters
(grease filter saturation
indicator -
F
)
After washing the anti-grease filter
, depress
knob
B
for about 3 seconds. The letter
F
will
disappear from the display.
Change activated carbon filters
(carbon filter
saturation indicator -
C
).
After replacing the charcoal filter
, depress
knob
B
for about 3 seconds. The letter
C
will
disappear from the display.
When the led in the lower right side is on, it indicates
that the cooker hood is ready for operation
(standby position), the flashing LED indicates
that the timer has been activated for selected
speed.
Warning!
The active carbon filter saturation function is not
activated.
In order to activate the carbon filter saturation indicator,
press buttons
E
and
F
simultaneously for 3 seconds.
Initially, only letter
F
will fbe displayed, then after the
3 seconds have passed, letter
C
will be displayed
as well, indicating that the carbon filter saturation
control system is active.
To switch off the system, re-press the same two
buttons: letter
C
appear on display and after 3
seconds letter it disappear and the device will be
switched off.
E
- Knob to decrease the speed: from intensive speed
P
to speed level
1
.
F
- Knob to increase (standby) speed to intensive speed
P
.
Attention! Intensive speed
P
has a duration of 5
minutes after which the cooker hood automatically
sets the speed to level
2
(suction power).
If the hood fails to operate correctly, briefly disconnect it from
the mains power supply for almost 5 sec. by pulling out the
plug. Then plug it in again and try once more before
contacting the Technical Assistance Service.
A
B
C
D
E
F
Operation
Model with electronic controls
1
- Motor
OFF
button
2
-
ON
button and motor speed selection button 1 - 2 - 3 -
1 - 2 - . . . .
3
- Speed 1 LED
4
- Speed 2 LED and metal grease filter saturation LED (in
this latter case, the LED will flash - See instructions on
grease filter cleaning).
Once the grease filters have been cleaned, press button
1
for about 3 seconds until you hear the acoustic signal
(beep): the
LED 4
will now stop flashing.
5
- Speed 3 LED and active carbon filter saturation LED (in
this latter case, the LED will flash - See instructions on
active carbon filter replacement).
Once you have replaced the charcoal filter, press button
1
for about 3 seconds until you hear the acoustic signal
(beep). LED 5 will now stop flashing.
Warning!
The active carbon filter saturation LED is not activated.
In order to activate the active carbon filter saturation
indicator, press buttons
2
and
7
simultaneously for 3
seconds. Initially, only
LED 4
will flash, then after the
3 seconds have passed,
LED 5
will also start flashing,
indicating that the active carbon filter saturation control
system is active.
To switch off the system, re-press the same two
buttons: after 3 seconds
LED 5
will stop flashing and
the device will be switched off.
6
- Intensive speed LED
7
- Intensive speed ON switch
This speed should be used when the concentration of
cooking fumes or odours is particularly strong (for
example when frying, cooking fish etc.).
T h e
fast speed will run for about 5 minutes and then return
to the speed previously set automatically (1, 2 or 3),
or switch off if no speed was selected.
To turn off the fast speed, before the end of the 5 minutes,
press button
1
or button
2.
8
- OFF lamp button
9
- ON lamp button
If the hood fails to operate correctly, briefly disconnect it from
the mains power supply for almost 5 sec. by pulling out the
plug. Then plug it in again and try once more before
contacting the Technical Assistance Service.
1
2 3 4
5 6 7
8
9
Summary of Contents for KSMD910X
